Basic Setup In Pure Ip Networks - Axis 1620 User Manual

Section 4: Setting Up - NetWare
42

Basic setup in Pure IP Networks

Installing the
AXIS 1620
In the NetWare Pure IP environment, you must use NetWare
Administrator to create the printer, print server and queue objects.
Follow the instructions below to install the AXIS 1620 in the NetWare
Pure IP environment:
1. Start the Configuration Wizard from the User mode in the AXIS
1620 Web interface.
2. Click your way through the Wizard until reaching the NetWare
page. Make sure that the PSERVER_NDS parameter is set. If you
want to change the parameter value or if the parameter value is
empty, enter the desired values. The parameter value must include
the tree or the preferred file server you want to login to and the
print server name including the context. The syntax of the
PSERVER_NDS parameter is described in PSERVER_NDS
parameter, on page 43.
3. Use NetWare Administrator to create and link the printer, print
server and queue objects in the NDS tree.
4. Use the Add Printer Wizard to install the printer on your client.
Note that only NDS queue based PSERVER printing is
supported.
Any configuration and management of the AXIS 1620 can be
performed from any standard Web browser. Please refer to Using a Web
Browser, on page 100.
In Pure IP environments, the AXIS 1620 supports NDS queue based
PSERVER printing or NDPS printing. Refer to Printing Methods, on
page 44 alternatively Setup using NDPS, on page 36.
AXIS 1620 User's Manual