Axis 1620 User Manual page 27

AXIS 1620 User's Manual
Methods for setting
the IP Address
Notes:
You can set the IP address using one of the following methods,
depending on your network operating environment:
Method Network environments
AXIS IP Installer Windows 95/98/NT/2000
Windows NT/2000, UNIX,
DHCP
NetWare 5, OS/2
Windows 95/98/NT/2000, OS/2
ARP
UNIX
RARP UNIX
BOOTP UNIX, NetWare 5, OS/2
Windows 95/98/NT/2000,
AXIS NetPilot
NetWare 5
The ARP and RARP methods operate on single network segments
only, that is they cannot be used over routers.
Refer to Setting Parameters, on page 81 for information about
setting the IP address in the Macintosh environment.
Section 3: Basic Installation
See ...
page 29
page 30
page 31
page 32
page 33
page 34
Basic Setup with
AXIS NetPilot, on
page 22
27