Axis 1620 User Manual page 38

Section 4: Setting Up - NetWare
38
Installing the
AXIS 1620 in
Pure IP networks
Having assigned an IP address to the AXIS 1620 as described in,
Assigning an IP address, on page 26, you are now ready to install the
AXIS 1620 for NDPS printing in Pure IP networks. Follow the
instructions below:
1. Start the NetWare Administrator. Create an NDPS Manager
object, if you do not have one available.
2. Use the NetWare Administrator to create the printer object.
The installed printer will appear in the NDPS Manager and the
printer object will appear in the Novell Printer Manager's NDS object
list.
Please refer to the appropriate Novell documentation for instructions
on creating NDPS Manager objects and the printer objects.
During the creation of the printer object you must specify the IP
Notes:
address of the AXIS 1620. If you have (D)DNS on your network
you can replace the IP address with the host name.
Enter LPT1 as your printer port, when prompted during the
creation of the printer object.
AXIS 1620 User's Manual