FRONT WHEEL AND FRONT BRAKE (TT-R125/TT-R125E)
Front wheel
1. Install:
Wheel bearing 1
●
Spacer 2
●
Wheel bearing 3
●
Oil seal 4
●
NOTE:
Apply the lithium soap base grease on the
●
wheel bearing and oil seal lip when installing.
Install the wheel bearing so that the enclosed
●
side is facing outward.
Use a socket that matches the outside diam-
●
eter of the race of the bearing.
Left side of wheel bearing shall be installed first.
●
Install the oil seal with its manufacture's
●
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
Brake shoe plate assembly
●
Collar set 1
●
NOTE:
Apply the lithium soap base grease on the oil
seal lip.
3. Install:
Front wheel
●
NOTE:
Make sure that the slot a on the brake shoe
plate with the stopper b on the front fork outer
tube.
4. Install:
Wheel axle 1
●
5 - 6
CHAS
New