CYLINDER HEAD
3. Install:
Timing chain
●
Camshaft sprocket
●
Installation steps:
Turn the crankshaft counterclockwise with
●
a wrench.
Align the "I" mark a on the rotor with the
●
stationary pointer b on the crankcase
cover.
Align the match mark c on the camshaft
●
sprocket with the stationary pointer d on
the cylinder head.
Fit the timing chain 1 onto camshaft
●
sprocket 2 and install the camshaft
sprocket on the camshaft.
NOTE:
When installing the camshaft sprocket, keep
the timing chain as tense as possible on the
exhaust side.
CAUTION:
Do not turn the crankshaft during instal-
lation of the camshaft. Damage or
improper valve timing will result.
Remove the safety wire from the timing
●
chain.
4. Install:
Washer
●
Bolt (camshaft sprocket)
●
NOTE:
Temporarily tighten the bolt (camshaft sprocket)
at this point.
4 - 17
ENG