Yamaha TT-R125EW Owner's Service Manual page 263

SWINGARM
3. Install:
Bolt (rear shock absorber - relay arm) 1
●
Plain washer
●
Nut (rear shock absorber-relay arm)
●
NOTE:
Apply the molybdenum disulfide grease on the
bolt (rear shock absorber - relay arm).
4. Install:
Bolt (connecting arm-frame) 1
●
Plain washer
●
Nut (connecting arm-frame)
●
NOTE:
Apply the molybdenum disulfide grease on the
bolt (connecting arm - frame).
5. Install:
Drive chain tensioner (lower) 1
●
Collar
●
Bolt [drive chain tensioner (lower)]
●
6. Install:
Bushing 1
●
Drive chain tensioner (upper) 2
●
Plain washer 3
●
Bolt [drive chain tensioner (upper)] 4
●
NOTE:
Apply the lithium soap base grease on the
bushing inner surface.
5 - 64
CHAS
35 Nm (3.5 m · kg, 25 ft · lb)
35 Nm (3.5 m · kg, 25 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)