Mounting The Control Assembly (Continued) - Graco PRECISIONSWIRL 310554V Instructions-Parts List Manual

Installing the Control Assembly

Mounting the Control Assembly (continued)

16.00
(406.4 mm)
NOTE: Hidden lines depict the
hole pattern for mounting the control
assembly.
NOTE: Conrol assembly must be
readily accessible and located 24-67
in. (0.6-1.7 m) above the floor.
F . 4
IG
12
7.05
(171.1 mm)
7/8 in. diameter
hole for power
supply entry.
14.50
(368.3 mm)
16.00
(152.4 mm)
Robot control
cable connector
4x 0.13 in. (8 mm) diameter
mounting holes
14.50
(368.3 mm)
Motor cable
connector
310554V