Setting
CHECK TONER
CASSETTE
EMPTY
NOTE
The printer prints when either ON or OFF is specified.
DATE AND TIME
I DATE SETTING
01/01/2001 to 31/12/2089
This printer has a clock function. This clock is used for the printer maintenance
and job history management. Specify date in this item when the clock is not
keeping correct date.
NOTE
•
Date is set before shipment.
•
Enter date using the following keys on the control panel.
- Increases/decreases number ........[
- Moves digits ..................................[
- Determines the entered date.........[OK]
•
If you do not change the date, press [Online].
I TIME SETTING
00:00:00 to 23:59:59
This printer has a clock function. This clock is used for the printer maintenance
and job history management. Specify date in this item when the clock is not
keeping correct time.
NOTE
•
Time is set before shipment.
•
The clock in the printer should be accurate within ± 60 seconds per month. Adjust
the clock periodically in this item.
•
Enter time using the following keys on the control panel.
- Increases/decreases number ........[
- Moves digits ..................................[
- Determines the entered time.........[OK]
•
If you do not change the time, press [Online].
Status
When a toner cartridge
needs to be replaced soon
When the paper cassette
has run out of paper
] [
]
] [
]
] [
]
] [
]
Message/Indicator Blink
<16 PREPARE TONER>
The Paper Source indicator
for the paper source that
has run out of paper blinks.
SETUP Menu Settings
5
5-13