Canon LBP3460 User Manual page 238

<32 2-SIDED ERROR>
Cause 1 Paper on which automatic 2-sided printing cannot performed is selected.
Remedy Select a standard paper size for the paper source and paper size setting in the
computer, and then print again.
Cause 2 The memory for performing 2-sided printing cannot be secured.
Remedy Increase the free space of RAM using the following procedure, then print again.
•
Delete the registered data.
•
Install an optional expansion RAM module. (See Getting Started Guide)
Cause 3 The printer received data for 2-sided printing on which the printer cannot
perform automatic 2-sided printing.
Remedy 1 The printer continues printing by pressing [Online]. However, the data on each
side is printed on two pages.
Remedy 2 Perform a soft reset in the RESET menu, change the paper size of the data to
the one on which the printer can perform 2-sided printing, and then print again.
<33 WORK MEM.FULL>
Cause The work memory for each operation mode cannot be secured.
Remedy 1 The printer continues printing by pressing [Online]. However, the data with
which an error has occurred is not printed properly.
IMPORTANT
When you continue printing by pressing [Online], be aware that the data of overlay or
macro that is already registered may be deleted.
Remedy 2 Perform a soft reset in the RESET menu, increase the free space of RAM using
the following procedure, and then print again.
•
Perform a hard reset or cycle the power of the printer (Be aware that all the
data in the memory that the printer has received will be deleted).
•
If you are using UFR II Printer Driver, install an optional expansion RAM
module. However, the problem may not be solved even after the expansion
RAM module is installed.
<35 TABLE FULL>
Cause The number of the documents in a job has exceeded 16.
Remedy The printer continues printing by pressing [Online]. However, the job with which
an error has occurred is not printed.
<Error Skip>
<Error Skip>
<Error Skip>
Message List 7-27
7