Canon LBP3460 User Manual page 239

<38 LOW IMAGE QLTY>
Cause
Remedy 1 The printer continues printing by pressing [Online]. However, the printer prints
Remedy 2 Perform a soft reset in the RESET menu, set GRADATION LEVEL (See p. 5-27)
Remedy 3 If you want to print without the image quality level being lowered, install an
<39 SPL MEM.FULL>
Cause
Remedy 1 The printer continues printing by pressing [Online]. However, the page with
Remedy 2 Perform a soft reset in the RESET menu, specify the paper size smaller, and
7
Remedy 3 Perform a soft reset in the RESET menu, set GRADATION LEVEL (See p. 5-27)
Remedy 4 If 2-SIDED PRINT. in the FEEDER MENU options in the SETUP menu is set to
Remedy 5 Change the setting for HALFTONES (See p. 5-28) in the QUALITY MENU
Remedy 6 Install an optional expansion RAM module, then print again. (See Getting
<41 CHK PAPER SZE>
Cause 1
Remedy
7-28 Message List
The printer cannot process the data because it is too complicated.
with the image quality level being lowered.
in the QUALITY MENU options in the SETUP menu to STANDARD, and then
print again.
optional expansion RAM module, and then print again. (See Getting Started
Guide)
Because spool memory has run out, the printer cannot print.
which an error has occurred are not printed.
then print again.
in the QUALITY MENU options in the SETUP menu to STANDARD, and then
print again.
ON, specify OFF, and then print again.
options in the SETUP menu, and then print again.
Started Guide)
The size of the paper loaded in the multi-purpose tray or paper cassette is
different from the setting for TRAY PAPER SIZE, CASSETTE1 SIZE, or
CASSETTE2 SIZE specified from the computer or control panel.
Match the size specified in "TRAY PAPER SIZE" (See p. 5-17) and the size of
the loaded paper, and then press [Online].
<Error Skip>
<Error Skip>