Selecting A Paper Source - Canon LBP3460 User Manual

Selecting a Paper Source

A paper source can be selected using the following procedure.
I When printing from Windows or Macintosh
Select a paper source in the printer driver. Because the default setting for the paper
selection in the printer driver is [Auto], if a paper source is specified by an application, the
printer selects the paper source automatically and feeds paper from the paper source.
Even when the paper source runs out of paper during printing, if paper of the same size is
loaded in other paper source, the paper source is switched automatically and the paper is
fed.
If you want to specify a paper source, select the paper source in the printer driver. For
3
more details on using the printer driver, see Help of the printer driver.
I When printing from DOS or UNIX
When you are printing from DOS, UNIX, or other operating system on which you cannot
use the printer driver, select a paper source using the control panel. The default setting for
this printer's paper source is set to AUTO.
Select a paper source with the printer's control panel using the following procedure.
1
2
3
3-12 Paper Source
Press [Feeder Selection].
→
PAPER SOURCE is displayed in the display.
Select PAPER SOURCE using [
Select the paper source using [
] and [ ], then press [OK].
→
→
] and [ ], then press [OK].
→
→