Canon LBP3460 User Manual page 39

I Power Save Mode 2 (Deep Sleep Mode) ... Power-saving effect: Large
The printer enters Power Save Mode 2 when it is in any of the following conditions.
POWER SAVE MODE is set to DEEP
SLEEP.
The printer has already entered Power
Save Mode 1.
2
USB in I/F CONNECTION is set to OFF.
APPLETALK in NETWORK MENU is set to
OFF.
There is no job on the print queue.
The printer has not communicated on the
network for more than 15 seconds.
IMPORTANT
Even if POWER SAVE MODE is set to OFF, the printer enters Power Save Mode 2 when
[Deep Sleep] is executed in [Device Control] in the Remote UI.
NOTE
•
When the printer enters Power Save Mode 2, only the Power indicator comes on.
•
Power Save Mode 2 can be released when the printer is in any of the following status:
- When [Online] on the control panel is pressed
- When the printer receives data from the computer (Only when the printer is online)
- When WAKE UP TIMER (See p. 5-15) in TIMER SETTINGS is set to ON, and the time
- The settings for [Utility Menu] are specified in the Remote UI
- When the settings for [Device Control] are specified in the Remote UI (Except for [Deep
2-6 Turning the Printer ON/OFF
Condition 1
specified WAKE UP TIME (See p. 5-14) has elapsed
Sleep])
Condition 2
POWER SAVE MODE is set to DEEP
SLEEP or PANEL OFF.
DEEPSLEEP TIMER (See p. 5-16) in
TIMER SETTINGS is set to ON, and the
time specified in DEEP SLEEP TIME (See
p. 5-16) in TIMER SETTINGS has elapsed.
APPLETALK in NETWORK MENU is set to
OFF.
There is no job on the print queue.
The printer has not communicated on the
network for more than 15 seconds.