Palm PIXI PLUS User Manual page 19

* These indicate that wireless services are off (airplane mode).
TIP When your phone is in airplane mode, you can turn the Wi-Fi and Bluetooth
features on individually (see Turn Wi-Fi on and off
on/off). To turn your phone back on, you must turn airplane mode off.
Turn wireless services on
When you turn on your phone, it automatically connects to your mobile
network so that you can make and receive phone calls and use other
wireless services (if supported by the local network).
BEFORE YOU BEGIN To use the phone, you must have an active SIM card
from AT&T inserted into your phone (see
• If airplane mode is turned on, you need to turn it off before you can
connect to your mobile network. Tap the upper-right corner of any screen
to open the connection menu. Tap
and Turn the Bluetooth feature
Insert the SIM card).
Turn off Airplane Mode.
When your phone locates a signal,
the screen in the Launcher, Card view, and Phone, and the
signal-strength icon appears at the top of the screen.
* These indicate that wireless services are on.
When you are inside a phone coverage area, the bars on the
signal-strength icon are filled in. If you're outside a coverage area, the
bars in the signal-strength icon appear dimmed with an X.
Turn everything (the screen and wireless services) on/off
Usually, turning your phone off and/or putting it in airplane mode is
sufficient for normal periods when you have the phone with you but you're
not using it. On rare occasions, however, you may want to put your phone
into deep sleep because you are not going to use it for an extended period.
At those times, do one of the following:
• Open Device Info and tap Reset Options. Tap Shut Down, and tap
Shut Down again.
AT&T appears in the upper-left corner of
Chapter 2 : Basics 19