Palm PIXI PLUS User Manual page 146
Advanced wireless phone running the palm® webos™ platform
Hide thumbs
Also See for PIXI PLUS:
- User manual (318 pages) ,
- Get started (29 pages) ,
- Quick start manual (29 pages)
Table of Contents
Advertisement
5
If a passkey is not required, pairing is complete when the Devices list
appears. If a passkey screen appears, do one of the following:
•
An automatically generated passkey appears on the passkey screen:
Check the other device screen to verify that the passkey is correct,
and tap
Yes, connect
•
The screen displays a passkey generated by your phone: Enter the
displayed passkey on the other device.
•
The screen prompts you to enter a passkey: Check the
documentation that came with the other device to see if there's a
required passkey. If so, enter that passkey on your phone. If not,
make up a passkey and enter it on both devices.
Connect with a paired device
After you pair with a device, you can connect to that device without having
to go through the pairing process again.
NOTE
To connect with a paired computer, you must initiate the connection from
the computer. See the computer documentation for instructions.
1
Open
Bluetooth
.
146
Chapter 8 : Web and wireless connections
to connect.
2
Make sure Bluetooth is on (see
tap the device name.
Disconnect from a device
Disconnecting from a device does not mean you delete the relationship you
created between the device and your phone. See
device
for instructions on how to reconnect with the device.
1
Open
Bluetooth
.
2
Tap the connected device name to disconnect from it. Or tap another
device name to disconnect from the current device and connect to the
new device.
Delete a device
Deleting a device means you end the relationship you created between your
phone and the device. This means that you must pair with the device again
if you want to connect (see
Make a pairing request to another device
Accept a pairing request from another
temporarily disconnect from a device, see
1
Open
Bluetooth
.
2
Throw the name off the side of the screen and tap Delete.
Rename a device
1
Open
Bluetooth
.
2
Tap and hold the device name.
3
Enter a new name.
Turn the Bluetooth feature
on/off) and
Connect with a paired
or
device). If all you want to do is
Disconnect from a
device.
Advertisement
Table of Contents
