Table of Contents
Advertisement
SC835 Chassis Manual
GPU Cooling Option
The SC835B chassis offers an optional graphics processing unit (GPU) cooling
package that includes an additional rear fan and additional air shroud.
Installing the External Rear Fan Bracket and Fan
1. Position fan bracket to the rear of the chassis directly behind the GPU cards.
The two fan bracket screw holes should be on top.
2. Tilt the bottom of the bracket slightly toward the chassis and position it on the
outside bottom ledge of the chassis.
3. Push the top of the bracket toward the chassis, align the two screw holes, and
secure it with two screws from the top.
4. Thread the fan cable through the hole in the top ledge of the chassis. Plug it
into the fan and into the four pin fan plug from the motherboard.
5. Snap the fan into the bracket.
Figure 5-12. Installing the GPU Rear Fan
5-14
Advertisement
Table of Contents
