Supero SC835BTQ - R1K28B User Manual page 53

Sc835b series
Table of Contents

Advertisement

Remove Plastic
Bracket If
Necessary
2
Cross Brace
Fans to
Remove
1
1
Installing the Optional GPU Air Shroud
Your chassis likely has a plastic bracket for add-in cards mounted on the cross
brace. It will interfere with the space needed by the shroud. To prepare, you must
remove the plastic bracket. If not, start at step 4.
1. Remove the two front fans from the left side (viewed from front).
2. From the front of the cross brace, remove the screws holding the plastic bracket
and remove the bracket.
3. Replace the fans.
4. Drop the air shroud over the GPU cards. On the top of the back of the chassis,
notice which screws are covered.
5. Lift the shroud, remove the appropriate screws, drop the shroud again, and
replace the screws.
1
4
Figure 5-13. Installing the GPU Air Shroud
5-15
Chapter 5: Chassis Setup
Chassis
Screws
1
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc835btq-r1k28b

Table of Contents