SC835 Chassis Manual
Installing an I/O Shield
Installing an I/O Shield
1. Remove the chassis cover.
2. Locate the I/O shield.
3. Depending on your motherboard, you must remove the existing I/O shield and re-
place it with the new one, or use the existing the shield to slide the ports through.
4. Connect the I/O shield to the motherboard following the motherboard docu-
mentation.
PS/2 Ports
USB Ports
Parallel Port
VGA or Video
Port
Figure 5-8. I/O Shield
5-10
LAN Port
Serial/
COM Port