System Fans
Four heavy-duty fans provide cooling for the chassis, three front fans and one
rear fan.
The fans are fully hot-swappable, that is they may be removed and replaced without
having to power-down the server.
Fan Release Tab
Front Fan (3 total)
Replacing a System Fan
Installing a System Fan
1. Open the chassis and locate the faulty fan. Never run the chassis for an extended
period of time with the chassis open.
2. Press the release tab on the fan and pull the fan upward.
3. Slide the new fan into the fan housing. Make sure the power connectors are
correctly aligned. The new fan will be immediately active.
Figure 5-9. Chassis Fans
5-11
Chapter 5: Chassis Setup
Fan Release Tab
Rear Fan