4-3
Control Panel LEDs
•
The control panel on the front of the chassis has six status LEDs.
!
•
Power Failure: When this LED flashes, it indicates a power failure in the power
supply.
•
Alert: This LED is illuminated when an alert condition occurs.
Status
Continuously on and red
Blinking red (1Hz)
Blinking red (0.25Hz)
Solid blue
Blinking blue
•
NIC2: Indicates network activity on LAN2 when flashing.
•
NIC1: Indicates network activity on LAN1 when flashing.
Informational LED
An overheat condition has occured.
(This may be caused by cable congestion)
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational
power supply
Local UID has been activated. Use this
function to locate the server in a rack
mount environment.
Remote UID is on. Use this function to
identify the server from a remote location.
4-3
Chapter 4: System Interface
Description