Table of Contents
Advertisement
SC835X Chassis Manual
5-6
Installing Cooling Elements
Air shrouds concentrate airflow to maximize fan efficiency. The SC835 chassis air
shroud does not require screws to set it up. Note that the rear fans must be removed
prior to installing the air shroud.
Installing the Air Shroud
1. Check that the rear fan has been removed from the chassis.
2. Place the air shroud over the motherboard as illustrated above, aligning the air
shroud between the front and rear fans.
3. Install the rear fan behind the air shroud. See the Rear System Fans section of
this chapter for additional details.
Figure 5-8. Installing the Air Shroud
5-10
1
3
2
Advertisement
Table of Contents
