Introduction; Dear Customer; Driving And Transport On Public Roads; Towing - Husqvarna P 524 Operator's Manual

Ride on mower
Hide thumbs Also See for P 524:
Table of Contents

Advertisement

Dear Customer!

Thank you for purchasing a Husqvarna Rider. Husqvarna Riders have been designed according to a unique concept with a front
mounted cutting deck and patented rear wheel steering. The Rider is built to give maximum efficiency even in small and confined
areas. Collected controls and a hydrostatic transmission controlled by pedals also contribute to the machine's performance.
This Operator's Manual is a valuable document. Following the instructions (use, service, maintenance, etc.) can considerably
increase the life span of your machine and even increase its resale value.
When you sell your Rider, make sure to give the operator's manual to the new owner.
The final chapter of this operator's manual comprises a Service Journal. Ensure that service and repair work is documented.
A well-kept service journal reduces service costs for the season-based maintenance and affects the machine's resale value.
Take the operator's manual along when the Rider is left to the workshop for service.

Driving and Transport on Public Roads

Check applicable road traffic regulations before driving and transport on public roads. You should always use approved load
retainers during transport and ensure that the machine is well secured.

Towing

When your machine is equipped with a hydrostatic transmission you should only tow the machine over short distances and at a
low speed, otherwise there is a risk of damaging the transmission.
The power transmission must be disengaged when towing, see "Bypass valves" on page 16.

Use

This ride-on mower is designed to mow grass on open and level ground surfaces. In addition, there is a number of accessories
recommended by the manufacturer that broadens the application area. Please contact your dealer for more information about
which accessories are available. The machine may only be used with the equipment recommended by the manufacturer. All other
types of use are incorrect. The manufacturer's instructions with regard to driving, maintenance, and repair must be followed
precisely.
IMPORTANT!
The transmission/gearbox guarantee is only valid if the
synchronisation of the front and rear wheels has been
checked and adjusted in compliance with the service
schedule. The system will be damaged if synchronisation
is not carried out.
The machine may only be operated, maintained, and repaired by persons that are fully conversant with the machine's special
characteristics and safety regulations.
Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic regulations must be
observed.
Unauthorised modifications to the design of the machine may absolve the manufacturer from liability for any resulting personal
injury or property damage.
4 –
English

INTRODUCTION

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents