Service Journal; Delivery Service; After The First 8 Hours - Husqvarna P 524 Operator's Manual

Delivery Service

1 Charge the battery for 4 hours at max. 3
amperes.
2 Check and adjust the air pressure in the front and
rear tyres (100 kPa/1.0 bar/14.5 PSI).
3 Adjust the cutting deck:
Adjust lift springs (effective weight of cutting deck
should be 12-15 kg / 26.5-33 lb).
Adjust the cutting deck so that its rear edge is
about 2-4 mm/1/8" higher than its front edge.
Adjust the cutting deck's cutting height setting so
that the cutting height limit is 5 mm/3/16" above
the unit frame at the lowest cutting height.
4 Check that the right amount of oil is in the engine.
5 Check that there is oil in the transmission's oil
tank.
6 Connect the battery.
7 Fill the fuel tank and start the engine.
8 Check that the machine does not move in neutral.
9 Check:
Driving forwards.
Reversing.
Engaging the blades.
Safety switch in the seat.
Safety switch for the lifting lever.
The safety switch for the hydrostat pedals.
10 Check the oil level in the hydraulic system, top up
if necessary.

SERVICE JOURNAL

11 Inform the customer about:
Delivery service has been carried out. No remaining remarks.
Certified:
_________________________________________________________
Date, mileage, stamp, signature
After the first 25 hours
1 Change engine oil.
2 Changing the gearbox oil.
3 Check the synchronisation between the front
4 Stretch the pump belt. Turn the adjustment
The need and advantages of following the service
schedule.
The transmission guarantee is only valid if the
synchronisation of the front and rear wheels has
been checked and adjusted in compliance with
the service schedule. If synchronisation is not carried out,
the system will be
damaged.
If the temperature is below 0 ° C the machine must
be warmed up for at least 10 minutes to heat up
the hydraulic oil and the transmission. Otherwise
there is a risk that the transmission breaks and the service
life is reduced.
The effects of service and maintaining a service
journal on the machine's resale value.
Application areas for CombiClip.
Fill in the sales papers, etc.
and rear wheels.
screw half a turn.
– 3
English