Pto Blades On/Off; Cutting Height Adjustment Lever; Seat; Refuelling - Husqvarna P 524 Operator's Manual

PTO blades on/off

To make the cutters rotate the cutting deck must be lowered
in the mowing position and the "PTO" button activated
(pulled up).

Cutting height adjustment lever

Using the lever, the cutting height can be adjusted to
6 different positions.
In order to obtain an equal cutting height, it is important that
the air pressure is the same in both front wheels.

Seat

The seat has a hinged mounting on the front edge and can be
folded forwards.
The seat can also be adjusted lengthways.
When making adjustments, the lever under the front edge of
the seat is moved to the left, after which the seat can be
moved backwards or forwards to the desired position.
PRESENTATION
The seat springs can be adjusted by moving the rubber blocks
in their brackets on the underside of the seat. Set both blocks
in the front, centre or rear positions.

Refuelling

The engine should be run on 95-octane unleaded petrol (not
mixed with oil). It can be beneficial to use environmentally
adapted alkylate petrol. (max. methanol 5%, max. ethanol
10%, max. MTBE 15%)
Do not fill the tank completely, leave an expansion area of at
least 2.5 cm (1").
!
IMPORTANT!
Do not use the fuel tank as a support area.
WARNING!
Petrol is highly flammable. Exercise care
and refuel outdoors (see safety
instructions).
– 15
English