Presentation; Throttle Control; Choke Lever; Speed Control - Husqvarna P 524 Operator's Manual

Presentation

Congratulations on your choice of an excellent quality product
that will give you great pleasure for many years. This
operator's manual describes P524. The machines are
equipped with a four-stroke V-Twin engine from Kawasaki.
The four-wheel drive machine is equipped with servo steering
and hydraulic lifts.
The power transmission from the engine is handled by a
hydrostatic gearbox, which allows variable variation of the
speed by using the pedals. One pedal to drive forwards and
one pedal to reverse.

Throttle control

The throttle is used to control the speed of the engine and
thereby also the rotation speed of the blades.
In order to increase or decrease the engine speed, the control
is moved forwards or backwards respectively.
Avoid idling the engine for long periods, as there is a risk of
carbon build-up on the spark plugs.
PRESENTATION

Choke Lever

The choke lever is used for cold starts in order to provide the
engine with a richer fuel mixture.
For cold starts, the lever shall be moved backwards to its
endpoint.
IMPORTANT! If the temperature is below 0 ° C the machine
must be warmed up for at least 10 minutes to heat up the
hydraulic oil and the transmission. Otherwise there is a risk
that the transmission breaks and the service life is reduced.

Speed control

The speed of the machine is variably controlled using two
pedals. Pedal (1) is used to travel forwards and pedal (2) to
reverse.
!
1
2
WARNING!
Make sure that no branches can interfere
with the pedals when mowing under bushes.
Risk for unintentional manoeuvring.
– 13
English