Troubleshooting - Honeywell Dolphin 7850 User Manual

Troubleshooting

If you encounter problems with your charger, refer to chart below for possible solutions. If problems
persist, please contact
Problem
The Status LED does not come on
when I insert a battery pack.
The Status LED lights red during
charging.
The Status LED lights red and
stays on without a battery in the
charging slot.
Limited Warranty (see page 13-2).
Issue
Check the power connections; make sure the POWER switch is
ON and the battery pack is properly seated.
Try to charge the battery in one of the other charging slots. If the
Status LED lights red again, then the problem is associated with
the battery pack.
An error occurred during the self-diagnostic test for that particular
charging pocket. Call Honeywell Product Service and request an
RMA.
For additional warranty and return information, see
Support and Warranty on page 13-1.
Customer
10 - 7