Usb Troubleshooting; Use Bluetooth Or Usb Tethering To Share A Data Connection; Minimum Requirements For Usb Tethering; Set Up And Connection - Honeywell Dolphin CT40 Series User Manual

•
For information on these accessories, contact your local sales representative.

USB Troubleshooting

•
•
Use Bluetooth or USB Tethering to Share a Data
Connection
You can share your mobile computer data connection with another device through
a USB tethering or Bluetooth tethering connection.

Minimum requirements for USB Tethering

•
•

Set up and Connection

1. Connect the USB communication accessory to both devices.
2. On the CT40, change the USB Preference setting from USB Charging to USB
3. Tap Settings
4. Select USB tethering to initiate the shared data connection.
Note: To stop sharing the connection, tap USB tethering again to turn Off the feature or
disconnect the USB accessory.

Minimum requirements for Bluetooth Tethering

•
Dolphin CT40 Mobile Computer
USB snap-on adapter
If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
driver is part of the Honeywell_Mobility SDK_Android software.zip file. To learn
where to get the software, see
Check to make sure you have enabled the USB for file transfer. To learn more, see
Configure USB Connection and Transfer Files
The CT40 must have an Android 9 OS or later.
A CT40 compatible USB communication accessory.
tether. To learn more, see
page 19.
> Network & Internet > Hotspot & tethering.
All devices must support Bluetooth communication.
Developer Information
Configure USB Connection and Transfer Files
on page 72.
on page 19.
on
71