Chapter 1 - Agency Information; Label Locations - Honeywell Dolphin 7850 User Manual

1
Agency Information

Label Locations

Dolphin 7850 mobile computers meet or exceed the requirements of all applicable standards
organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe
operation is to operate them according to the agency guidelines that follow. Please read these guidelines
carefully before using your Dolphin mobile computer.
Dolphin 7850 802.11b/g (WLAN) & Bluetooth
Dolphin 7850 RF terminals are designed to comply with the most current applicable standards on safe
levels of RF energy developed by the Institute of Electrical and Electronics Engineers (IEEE) and the
American National Standards Institute (ANSI) and has been recommended for adoption by the Federal
Communications Commission (FCC).
R&TTE Compliance Statement—802.11b/g
Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/
EC). This equipment has been assessed to the following standards as applicable:
Parameter Specification
EN 300 328-2:2000
EN 301 489-1 (2002-08)
R&TTE EN 301 489-17 (2002-08)
EN 60950:2000
EN 50361:2001
This product is marked with
the R&TTE Directive, 1999/5/EC. The equipment is intended for use throughout the European
Community. PAN European Frequency Range: 2.402—2.480 GHz.
Restrictions in France are as follows:
• Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.400—2.4835 GHz
• Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400—2.454 GHz band and maximum
power (EIRP*) of 10 mW for the 2.454—2.483 GHz band
For further information, please contact:
Honeywell Imaging & Mobility Europe BV
Nijverheidsweg 9
5627 BT Eindhoven
The Netherlands
(WLAN)
in accordance with the Class II product requirements specified in
Compliance Label
Laser Safety Label
and/or Bluetooth
1 - 1