Back Panel - Honeywell Dolphin 7850 User Manual

Back Panel

Handle Saddle
DC Power
Jack
Auxiliary Battery Well
The auxiliary battery well charges an additional Li-ion battery pack independently of the
terminal well. This feature ensures that you can always have a fully-charged battery for your
terminal; see
DC Power Jack
Connect the power cable to this power jack; see
Handle Saddle
The curve on the back wall of the terminal well accommodates the pistol-grip handle when the
terminal is seated in the well.
RS-232 Port
For RS-232 data communication, use the 9-pin, RS-232 cable from Honeywell to connect this
port to a peripheral device. For more information, see
USB Port
This USB Port is full-speed, 2.0 compliant, and requires ActiveSync 4.5 or higher. Using a USB
cable, you can connect the base to a USB-compliant device. When the base is connected to
that device, the terminal is connected to the device when seated in the terminal well.
The base acts as a USB device by interfacing the USB signals of the terminal to the USB
signals of the host workstation; see
RS-232 Port USB Port
Charging a Spare Battery Pack
Auxiliary
Battery
Well
on page 9-4.
Power on page
RS-232 Serial Connector
ActiveSync Communication
9-5.
on page
on page 9-8.
9-6.
9 - 3