Registering Your Phone - Polycom SoundPoint IP 670 User Manual

Note

Registering Your Phone

With mounting tab of the base unit facing up, fasten the base unit to the
3.
wall mount using wall anchors (not included).
The wall mount is not included in for the Polycom® SoundPoint IP® 670 Desk
Phone 670 package. Contact your system administrator if you require one.
Generally, your phone will be deployed with multiple other phones. In this
case, your system administrator will configure the phone parameters
beforehand, so that after you set up your phone, the phone will be registered
and ready to use.
If your phone is not part of a large phone deployment, your phone may not be
registered after you set it up. Before you use your phone, you or your system
administrator will have to register it. For detailed information on how to
register your phone after you install it, refer to "Quick Tip 44011: Registering
Standalone SoundPoint IP, SoundStation IP, and Polycom VVX Phones" at
http://www.polycom.com/usa/en/support/voice/soundpoint_ip/VoIP_T
echnical_Bulletins_pub.html .
Getting Started with Your Phone
1 - 8