Connecting The Handset And Optional Headset - Polycom SoundPoint IP 670 User Manual
Desk phone for 8x8 virtual office
Hide thumbs
Also See for SoundPoint IP 670:
- User manual (126 pages) ,
- Configuring (9 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Connecting the Handset and Optional Headset
Power over Ethernet
Using a regular CAT5 cable, the phone can be powered from a PoE (IEEE
802.3af) compliant switch or hub.
To connect the PoE:
•
Plug the supplied network cable between the LAN jack on the phone and
an available power and data port on the in-line power switch.
To connect the handset and optional headset:
Connect the short straight end of the phone cord to the handset and the
1.
corresponding longer straight end of the cord to the handset jack on the
back of the phone.
2.
Connect the headset (optional) to the headset jack on the back of the
phone.
Headset
(optional)
For information on supported headsets, go to
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical_Bulletins_pu
b.html
and look for "Technical Bulletin 37477: Headset Compatibility List".
Getting Started with Your Phone
Handset
1 - 5
Advertisement
Table of Contents
Need help?
Do you have a question about the SoundPoint IP 670 and is the answer not in the manual?
Questions and answers