Hosting Local Conference Calls; Setting Up Conference Calls - Polycom SoundPoint IP 670 User Manual

Hosting Local Conference Calls

Note

Setting Up Conference Calls

Note
You can create a conference with other parties using the phone's local
conference feature. You can create a conference at any time between an active
call and a call on hold (on the same or another line) by pressing the Join soft
key. The conference management feature allows you to view all parties in a
conference call. From the Manage Conference page, you can add, hold,
remove, and mute specific conference
The conference management feature is an optional feature and may not be
supported on your particular system. For more information, contact your system
administrator.
This section provides the following step-by-step instructions:
• Setting Up Conference Calls
• Splitting Conference Calls
• Ending Conferencing Calls
To set up a conference call:
Call the first party.
1.
You can either dial the phone number directly or search for the number in the
Contact Directory or Call Lists. For more information, refer to
3-2, Searching for Contacts
Press
2.
The active call is placed on hold.
parties.
on page 2-19, or Managing Call Lists
or the Confrnc soft key to create a new call.
Using the Features of Your Phone
Placing Calls on page
on page 2-12.
3 - 9