Call Hold And Resume; Multiple Calls On Hold; Microphone Mute; General Key Use - Polycom Soundpoint IP 301 User Manual

Press the Answer key or the line key (
Using the Headset
Pressing
is enabled, pressing the line key (
In all cases, the active call will appear on the display showing call duration and destination.

Call Hold and Resume

During a call, press
the display. Press the Resume soft key to retrieve the call.

Multiple Calls on Hold

If multiple calls are on hold on a single linekey, use the arrow keys to switch between the calls then press
the Resume soft key to retrieve the desired call. If more than two calls are on hold on a single key, an
indication will appear on the display, for example "2/3" shows that this is the second call out of three calls.
If calls are on hold on more than one key, the details of the calls on any line can be viewed by pressing
that line holding it down for a few seconds. key is pressed briefly, the first call on on that line key will be
retrieved.

Microphone Mute

During a call, press
indicates that the other party (parties) cannot hear you.
Microphone Mute applies to all modes: handset, headset, and hands-free.
You can still hear all other parties while Mute is enabled. To turn off Microphone Mute, press again.

General Key Use

To navigate through menus and to enter data, these are useful tips:
1. Use the arrow keys to scroll through lists. In some cases the * and # keys can be used as Page Up
and Page Down keys.
4 of 10
will answer the call through an optionally connected headset. If headset memory mode
or the Hold soft key. The call will be placed on hold and this will be indicated on
. The LED on the phone lights up and a flashing microphone on the display
).
) will do the same.