Headset Memory Mode; Display Contrast - Polycom Soundpoint IP 301 User Manual

Headset Memory Mode

As an option, the headset can be permanently enabled. This is especially useful for regular headset users.
To do this:
1. Press
2. Select Settings followed by Basic, Preferences , Headset Memory.
3. Use the up or down arrows and Select soft key to enable Headset Memory Mode.
4. Press
Subsequent calls to or from this phone using the headset will activate a flashing headset icon on the
display. Pressing the line keys or Answer soft key to receive a call will now connect to the user's headset
automatically.
Repeat steps 1-3 and select Disable to turn Headset Memory Mode off.

Display Contrast

To adjust the contrast on the display to a comfortable level:
1. Press
2. Select Settings, Basic, followed by Contrast.
3. Press the Up or Down soft keys (or volume keys) to increase or decrease the display contrast.
4. Press the Ok or Cancel soft keys to accept or cancel changes.
5. Press
Ring Type
Many ring types are available. Users can select different rings to distinguish between lines or to have a
different ring from their neighbor's phone.
To change the incoming ring to a desired sound:
1. Press
2. Select Settings followed by Basic, Ring Type.
3. (Optional) If multiple lines are used, first select which line to change.
4. Using the arrow keys, highlight the desired ring type. Press the Play soft key to hear the selected
ring type.
5. Press Select to change to the selected ring type.
6. Press
8 of 10
.
to return to the main menu.
.
or the Exit soft key to return to the idle display.
.
or the Exit soft key to return to the idle display.