Planet IPX-1500 User Manual page 45

Example:
Site A wants to establish VPN connection to site B & C.
Site B wants to establish VPN connection to site C.
First, site A select tunnel 1 as the channel to site B then site B select tunnel 1 to complete this
connection.
Second, site A select tunnel 2 as the channel to site C then site C select tunnel 2 to complete this
connection.
Third, site B select tunnel 2 as the channel to site C then site C select tunnel 1 to complete this
connection.
2. The packet could be encrypted or non-encrypted.
IPX VPN router supports peer-to-peer packets encryption. It uses 128Bit encryption. User could enable
encryption or disable encryption for each connection.
3. IPX & neighborhood.
IPX VPN provides an easier way to make Windows user to find other computer by name. It supports
Microsoft neighborhood & IPX by enable IPX and Neighborhood.
4. IP address setup
IPX VPN could support both FIX IP & Float IP address
In general, peer-to-peer VPN connection requires two end points have Static IP address. Because of
IPX VPN could support DDNS service and allowing remote site to enter domain name. Therefore, by
select Float IP and DDNS domain as the remote IP address, IPX VPN could find end point both FIX IP
non-Fix IP address.
Please note that to prevent potential collision in the VPN environment. It requires
end_point-to-end_point uses IP address ranges differently.
For example, Site A LAN IP 192.168.0.x. Site B LAN IP 192.168.1.x
45