Preparation Before Beginning Web Administration On Ipx-1500; Checking Tcp/Ip Settings On Windows 95/98 - Planet IPX-1500 User Manual

Note

Preparation before beginning web administration on IPX-1500

In this section, we'll introduce steps of how to setup a PC to communicate with IPX-1500 and Internet
access related parameters through TCP/IP protocol configuration.
Before starting web browser to connect to IPX-1500, please check TCP/IP configurations on PC: the
PC must be configured either as a DHCP client and or fixed IP allocation on the intranet or Internet.
After ensuring TCP/IP configuration on the managing workstation, you may connect to web
administration page of IPX-1500 either from intranet, or Internet
Following are guidelines of setting up TCP/IP configurations on different OS platform

Checking TCP/IP settings on Windows 95/98

If there is no TCP/IP installed on your Windows 95 or Windows 98, you must add the protocol and
change the settings on your PC.
Step 1 Open the Control Panel, and double-clicking the Network icon. The Network window appears
Step 2 If TCP/IP protocol shown in the network window, please continue to the next step. If it is not
shown, please add TCP/IP protocol support as follows:
a. Clicking Add.
b. Double-clicking Protocol in the Select Network Component Type window, then the
Select Network Protocol window appears.
c. Choose Microsoft for the manufacturer.
d. Choose TCP/IP for the network protocol.
e. Clicking OK, and the Network window appears.
Please locate your PC in the same network segment
(192.168.0.x) of IPX-1500. If you're not familiar with
TCP/IP, please refer to related chapter on user's manual
CD or consult your network administrator for proper network
configurations.
12