Security; Enabling A Pin; Changing A Pin; Disabling A Pin - Motorola ES400 User Manual

Select a ring tone for incoming calls from the Ring tone: drop-down list. To hear a sample of the selected ring
2.
tone, tap . Tap
NOTE To use custom .wav, .mid, or .wma files as ring tones, use ActiveSync on the host computer to copy the file to
the /Windows/Rings folder on the ES400. Then select the sound from the ring tone list
Select a keypad tone from the Keypad: drop-down list. This selection determines the tone that sounds when
3.
entering a phone number on the keypad.
Select Short tones or Long tones to specify the duration of the sound when you press a number on the
keypad. Select Off to disable tones.
NOTE Turning off sounds saves power and prolongs battery life

Security

Enabling a PIN

Tap Start > Settings > Personal > Phone > Security.
NOTE Place emergency calls at any time, without requiring a PIN or a SIM card
To require a PIN when using the phone:
Select the Require PIN when phone is used check box.
1.
Use the dialer keypad to enter a four to eight digit PIN.
2.
Tap Enter to enable the PIN and return to the Security tab.
3.

Changing a PIN

CAUTION If the user enters an incorrect PIN, the message "SIM PIN incorrect: Try again" appears. After three
consecutive incorrect attempts, the SIM card is blocked. The phone does not allow entering a PIN again
and the user must obtain a PIN Unblock Key from the service provider.
Tap Change PIN.
1.
Use the dialer keypad to enter the current PIN.
2.
Tap Enter.
3.
Use the dialer keypad to enter a new four to eight digit PIN.
4.
Tap Enter.
5.
Reenter the new PIN for confirmation and tap Enter.
6.
Tap OK to confirm the change.
7.

Disabling a PIN

Deselect the Require PIN when phone is used check box.
1.
Use the dialer keypad to enter the current PIN.
2.
to end the ring tone.
Phone Network Setup
.
.
4 - 5
.