Editing Fingerprint Swipes - Motorola ES400 User Manual

Add Fingerprint Window
Figure 11-2
Pull the tip of a finger across the fingerprint reader in a downward motion (toward the camera lens) or an
2.
upward motion (toward the Power button) starting at the bottom of the fingerprint.
or
Push the tip of a finger across the fingerprint reader in an upward motion (toward the Power button) or a
downward motion (toward the camera lens) starting at the top of the fingerprint.
When the fingerprint is read successfully, a green fingerprint appears in the first box. If the fingerprint is read
3.
unsucessfully, a red fingerprint appears in the box.
Repeat swiping the finger two more times.
4.
Upon successful reading, a template is created. Swipe the finger one more time to verify the template.
5.
Once the fingerprint is enrolled, tap Save and then OK.
6.

Editing Fingerprint Swipes

To change or edit the enrolled fingerprint:
Tap Edit fingerprint.
1.
Select the fingerprint to edit.
2.
In the text box, change the name associated with this fingerprint.
3.
Tap Change fingerprint to edit the fingerprint data.
4.
Swipe a new fingerprint.
5.
Tap Program launched to select a program to automatically launch when a particular fingerprint is swiped.
6.
Settings 11 - 5