Available Services; Object Push Services Via Beam - Motorola ES400 User Manual

If the user created a passcode, the user is prompted by the other device to enter the same passcode. Enter the
9.
created passcode to establish a paired connection. (If the user entered a passcode from the device, the user
shouldn't have to do anything on the other device.)
When the connection is complete, a list of matching and supported services on the device appears.
10.
Select the services you want to use and tap Finish. The services on the new devices have to be selected or
11.
else the pairing won't include those services, even though the devices are paired. If services are not selected,
the user is continually reprompted for the passcode from the device.
The device appears in the list on the main window.
12.
After the passcodes have been accepted on both sides, a trusted ("paired") connection is established.

Available Services

NOTE Some devices might not require a PIN. This depends upon the device's authentication.
The ES400 with Microsoft Bluetooth stack offers the following services:
•
OBEX Object Push Services via Beam
•
Hands-Free Audio Gateway Services
•
Serial Port Services
•
Personal Area Networking Services
•
PBAP Services
•
Dial-up Networking
•
HID Client
•
A2DP/AVRCP.
See the following sections for information on these services.

Object Push Services via Beam

NOTE The user can only send files to a remote device using the Beam function.
Use the OBEX Push Service to send files and contacts to another Bluetooth device. To transfer files between the
ES400 and another Bluetooth enabled device:
Ensure that Bluetooth is enabled and discoverable on both devices.
1.
Ensure that the two devices are within 30 feet (10 meters) of one another.
2.
Tap My Apps > File Explorer.
3.
Navigate to the file to transfer.
4.
Tap and hold on the filename until the pop-up menu appears.
5.
Bluetooth 9 - 5