Music Settings; Play; Voice Tag; Digit Trainer Settings - Motorola ES400 User Manual

Music Settings

The Music tab lists all the music files found on the ES400. When a media file is downloaded, Voice Commander
automatically updates the recognition database.
A check in a box indicates that the music file can be recognized normally. An unchecked box indicates that the
music file is not in the recognition range. A grayed box indicates that the music file name contains some
unrecognizable characters, such as symbols or marks. The user can build a voice tag to enable it.

Play

Tap to hear the pronunciation of an application.

Voice Tag

The user can record a voice tag for selected music file to enhance usability and accuracy.
voice tag is built.
To record a voice tag:
Select a music file.
1.
Tap .
2.
After the beep, say the music file name. For example: Drive.
3.
After the second beep, repeat it.
4.
Voice Commander builds the recorded voice tag.
5.
Voice Commander plays back the recorded voice tag to confirm the voice tag has been created successfully,
6.
and appears to the right of the music file name.
NOTE Tap

Digit Trainer Settings

The user can improve the Voice Commander digit dialing success by performing the Digit Trainer sequence:
Tap .
1.
Start reading first string after hearing a beep. When finished, the system plays back the recorded voice and ask
2.
for confirmation.
If the utterance is correct and clear, tap Yes. The system moves into next digit string for recording.
3.
If the utterance is incorrect, tap No. The system stays at the current string for re-recording.
Repeat steps 1 through 3 for the remainder of the strings (at any time, tap Cancel to stop.)
4.
After finishing the recording of 10 digit strings, tap Done to confirm the adapted model or tap Remove All to
5.
delete the adapted model and re-train.
again rebuild the voice tag. Tap to delete the voice tag.
Settings 11 - 29
indicates that the