Synchronization With The Es400 - Motorola ES400 User Manual

12 - 12 ES400 User Guide
Select Start >
1.
NOTE Assign each ES400 a unique device name. Do not try to synchronize more than one ES400 to the same name.
In the
2. ActiveSync
Select Allow USB connections check box.
3.
Select the
4. Show status icon in Taskbar
Select OK to save any changes made.
5.

Synchronization with the ES400

NOTE When the ES400 is connected to a host computer and an ActiveSync connection is made, the WLAN radio (if
applicable) is disabled. This is a Microsoft security feature to prevent connection to two networks at the same
time.
To synchronize with the ES400:
If the
1. Get Connected
.
Next
Select the check box to synchronize with a server running Microsoft Exchange if applicable and then click
2.
Select the appropriate settings and click
3.
During the first synchronization, information stored on the ES400 is copied to the host computer. When the copy is
complete and all data is synchronized, the ES400 can be disconnect from the host computer.
NOTE The first ActiveSync operation must be performed with a local, direct connection. Windows Mobile retains
partnerships information after a cold boot.
For more information about using ActiveSync, start ActiveSync on the host computer, then see ActiveSync Help.
>
Programs Microsoft ActiveSync
window, select >
File Connection Settings
check box.
window does not appear on the host computer, select Start >
Next
on the host computer.
. The
Connection Settings
and then click .
Finish
window appears.
and then click
ActiveSync
Next
.