Switch Housing
www.CasablancaFanCo.com
1.888.227.2178
Feed the wire plug through the center
Screw two housing assembly screws
Insert the third screw, found in
from the
hardware bag halfway into
hole of the upper switch housing, then
the
hardware bag, into place and then
wrap keyhole slots around the screws and
the motor housing. It does not matter
tighten all three screws.
twist counterclockwise.
which two screw holes you choose.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing fixture falling.
10
M6017-01 • 04/11/13 • © Casablanca Fan Company