Switch Housing
www.CasablancaFanCo.com
1.888.227.2178
Feed the optional light kit wires through
Insert the third screw, found in
Screw two housing assembly screws from
the center hole of the upper switch
the
hardware bag, into place and
the
hardware bag halfway into the
housing, then wrap keyhole slots around
then tighten all three screws.
mounting plate. It does not matter which
two screw holes you choose.
the screws and twist counterclockwise.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing fixture falling.
13
M6006-01 • 02/12/16 • © Casablanca Fan Company