Polycom Conference Phone Owner's Manual page 37

Holding and Resuming Conferences
When you place a conference call on hold, you place all other
conference participants on hold.
To place a conference call on hold:
From the Active:Conference screen, press the Hold soft key.
The Hold:Conference screen displays. The other parties in the
conference call are put on hold.
From the Hold:Conference screen, you can do the following:
• To resume the conference call, press the Resume soft
key. The Active:Conference screen will display again.
• To place a call to a new party, press the New Call soft key.
The conference remains on hold, and the new call
becomes the active call.
To end the conference call and split the conference into
•
two separate calls on hold, press the Split soft key.
Splitting Conferences
When a conference has been established, a Split soft key is
available. When you split a conference, you end the conference
and put all parties on hold.
To split a conference:
From the Active:Conference screen, press the Split soft key.
The conference ends, and all calls are split into individual calls
and put on hold.