Other Operations And Functions; Other Operations; Playing Super Audio Cd; Recording On An External Device (Rec Out Mode) - Denon AVP-A1HD Owner's Manual

SOURCE SELECT
Surround mode
<ZONE2/3/4 / <PHONES>
REC SELECT>
[ AMP]
INPUT MODE
SOURCE
SELECT
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit

INPUT MODE
Other Operations and
Functions

Other Operations

Playing Super Audio CD

1
Assign "DENON LINK" with the "Digital" setting or
assign "HDMI" with the "HDMI" setting (vpage
43, 44).
2
Either turn
SELECT]
to select the input source assigned in step 1.
The " " or "
3
Select "AUTO" for the
Surround mode
4
Select the surround mode (vpage 46 ~ 48).
We recommend playing in the DIRECT mode.
5
Start playing the Super Audio CD.
The " " indicator lights on the display.
For operating instructions, refer to the respective equipment's
operating instructions.
• When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are first converted
into PCM format, then into analog signals.
• "DSD DIRECT" is shown on the display when playing DSD 2-channel
signals in the DIRECT mode. "DSD MULTI DIRECT" is shown on
the display when playing DSD multi--channel signals in the DIRECT
mode.
• The DSD signal may not be output depending on the equipment
that is connected.For further details, refer to the user manual for the
equipment being used.
<SOURCE SELECT> [SOURCE
or press
" indicator lights on the display.
INPUT MODE
(vpage 45).
Recording on an External Device
(REC OUT mode)
You can listen to one program source while recording a different
program source.
1
<ZONE2/3/4 / REC SELECT>
Press
"ZONE3 SOURCE" is shown on the display.
2
<SOURCE SELECT>
Turn until "RECOUT SOURCE"
is displayed.
The " " indicator lights.
ZONE3 SOURCE ZONE3 TUNER ····
RECOUT NET/USB ····
3
<SOURCE SELECT>
Turn to choose the input source
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment's
operating instructions.
5
Start recording.
For operating instructions, refer to the respective equipment's
operating instructions.
<ZONE2/3/4 / REC SELECT>
• To cancel, press
SELECT>
until "ZONE3 SOURCE" is displayed.
• Make a test recording before starting the actual recording.
• Signals are only output to the analog REC OUT connectors when
the digital signals input to the digital input connectors (OPTICAL/
COAXIAL) are PCM (2-channel) signals.
• Digital audio signals input to the DENON LINK or HDMI connectors
are not output to the REC OUT connectors, so connect using the
OPTICAL or COAXIAL connectors.
• Sources selected with the REC OUT mode are output from ZONE3
as well.
• In the REC OUT mode, the remote control unit's ZONE3 mode
buttons cannot be operated.
• When the "Digital Out" setting is set to "ZONE4 Select" , the
OPTICAL4 output connector becomes the ZONE4 output. When
using for recording, set to "Rec Select" .
• Copyright protected network audio (Internet radio, media server and
USB) signals cannot be output from the digital output connectors
(OPTICAL).
.
ZONE3 NET/USB
RECOUT SOURCE
<SOURCE
, then turn