A6 Dimmer; A7 Setup Lock; A8 Maintenance Mode; A9 Firmware Update - Denon AVP-A1HD Owner's Manual

A6 Dimmer
Adjust display brightness of the receiver.
[Selectable items] Bright Dim Dark
Operating from the main unit
Press the DIMMER button.
Bright Dim
OFF Dark
If POA-A1HD is connected using the control link, POA-A1HD meter
operation is turned OFF when the AVP-A1HD display is turned "OFF" .
A7 Setup Lock
Protect settings from inadvertent change.
ON OFF
[Selectable items]
• When "Setup Lock" is set to "ON" , the settings listed below can
no longer be changed. Also, "SETUP LOCKED!" is displayed if you
attempt to operate related buttons.
⋅ GUI menu operations
⋅ RESTORER
⋅ Night Mode
⋅ Parameter
⋅ Room EQ
⋅ Channel Level
⋅ Audio Delay
MENU
• To cancel the setting, press the button to re-display the "Setup
Lock" screen, then change the setting to "OFF" .
A8 Maintenance Mode
This sets the function for maintenance by a DENON serviceperson
or installer. (For professional use only.)
OFF
This function allows a DENON serviceperson or installer to check the
AVP-A1HD's status and make settings via the Internet.
NOTE
Only use this function if so instructed by a DENON serviceperson or
installer.
A9 Firmware Update
Update the firmware of the receiver.
If POA-A1HD is connected using the control link, POA-A1HD is updated
simultaneously with update of AVP-A1HD.
Check for Update
You can check for firmware updates. You can also check approximately
how long it will take to complete an update.
Start
Execute the update process.
When updating starts, the power indicator becomes red and the GUI
screen is shut down.
The amount of update time which has elapsed is displayed during the
update process.
When updating is complete the power indicator becomes green and
normal status is resumed.
b If the display reads as shown below, check the settings and network
environment, then update again.
Display
Updating failed
Login failed
Server is busy
Connection fail
Description
Updating failed.
Failure to log into server.
Server is busy. Wait a while then try again.
Failure connecting to server.
S0 Add New Feature
Display the new functions which can be purchased for downloading
to the AVP-A1HD and upgrade.
When you purchase a new function and register your user information,
"Registerd" is displayed on this menu and you can proceed with the
upgrade.
Upon completion of the upgrade, you can start using the new
function.
Upgrade
Execute the upgrade process.
When upgrading starts, the power indicator becomes red and the GUI
screen is shut down.
The amount of upgrade time which has elapsed is displayed during the
upgrade process.
When upgrading is complete the power indicator becomes green and
normal status is resumed.
b If the upgrade is not successful, an error message identical to those
in "Firmware Update" will appear on the display.
Notes concerning use of "Firmware Update" and
"Add New Feature"
• In order to use these functions, you must have the correct system
requirements and settings for a broadband Internet connection. For
details, see pages 34 ~ 36.
• Do not turn off the power until updating or upgrating is completed.
• Normally there is no need to use this function, aside from the cases
described below.
⋅ Firmware Update : In the case of applying the latest firmware
updates (free)
⋅ Add New Feature : In the case of future upgrades to add new
functions to the receiver (payment required)
⋅ Information regarding the "Firmware Update" function and "Add
New Feature" will be announced on the DENON web site each
time related plans are defined.
• Even with a broadband connection to the Internet, approximately
1 hour is required for the updating/upgrading procedure to be
completed.
Once updating/upgrading starts, normal operations on the
AVP-A1HD cannot be performed until updating/upgrading is
completed.
Furthermore, updating/upgrading the firmware may reset the
backup data for the parameters, etc., set for the AVP-A1HD.
• When updating/upgrading the firmware, we recommend using
wired connections (Ethernet cable).