Input Mode; Rename; Source Level; Input Att - Denon AVP-A1HD Owner's Manual

Resolution
Set resolution for video signal output to HDMI.
[Selectable items] Auto 480p/576p 1080i
Operating from the main unit
SCALE
Press the button.
Auto 480p / 576p
1080p 720p
• This can be set when "i/p Scaler" is set to anything other than
"OFF" .
• When the "i/p Scaler" is set to "A to H & H to H" , the resolutions can
be setup to the analog video input signal and HDMI input signal.
Progressive Mode
Select optimum progressive mode for video material.
[Selectable items] Auto Video1 Video2
This can be set when "i/p Scaler" is set to anything other than "OFF" .
Aspect
This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
[Selectable items] Full Normal
This can be set when "i/p Scaler" is set to anything other than "OFF" .
g Input Mode
Make input mode and decode mode settings for this source.
The selectable input modes depend on the input source and
720p 1080p
"Assign" setting (vpage 43, 44).

Input Mode

Set the input mode for this source.
1080i
[Input source] PHONO
[Selectable items] Analog
[Input source] NET/USB
[Selectable items] Auto
[Input source]
DVD HDP TV/CBL SAT
TUNER CD
[Selectable items]
Auto HDMI Digital
When a digital signal is properly input, the "
the display. If the " " indicator does not light, check the digital input
connector assignment and the connections.
Operating from the main unit or main remote

control unit

INPUT MODE
Press the
on the main remote control unit.
Auto
EXT. IN
z1: This can be selected for input sources for which the GUI menu
"Assign" setting is set to "HDMI" (vpage 43). Excluding CD
and TUNER.
z2: This can be selected for input sources for which the GUI menu
"Assign" setting is set to "Digital" (vpage 44).
( )
iPod
EXT. IN
EXT. IN
VCR DVR-1 DVR-2 V.AUX
Analog EXT. IN
" indicator lights on
INPUT
button on the main unit or the button
z1 z2
HDMI Digital
Analog
Decode Mode
Set the decode mode for this source.
[Input source]
DVD HDP TV/CBL SAT VCR DVR-1
TUNER CD
[Selectable items] Auto PCM DTS
• This can be selected for input sources for which the GUI menu
"Assign" setting is set to "HDMI" or "Digital" .
• Only set "PCM" and "DTS" when playing the respective signals.
h Rename
Change the display name for this source.
Names containing up to 8 characters can be input.
[Characters that can be input]
A ~ Z a ~ z 0 ~ 9 ! " # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
j Source Level
Corrects the playback level of the selected input source's audio
input.
–12dB ~ ~ +12dB
[Variable range] 0dB
For input sources for which "HDMI" or "Digital" are set at the GUI
menu "Assign" setting, the analog input level and digital input level
can be set separately.
k Input Att.
Set when replay sound is distorted because the input level is too
large.
[Selectable items] OFF –6dB
DVR-2 V.AUX