Other Operations And Functions; Other Operations; Playing Super Audio Cd - Denon AVP-A1HD Owner's Manual

[Example 4] PDA menu screen
Select to
operate each
zone.
NOTE
You cannot change setup menu operations and zone name on the
PDA menu screen.
[Example 5] Net Audio operating screen
Click to move up/down the menu
pages.
Click the menu from which you want to
make settings.
Click when selecting menu.
Click to stop play.
Click to repeat play.
Click to random play.
When registering presets, click "v" to
select the channel you want to register,
and then click "MEMORY".
Click "v" to select the preset channel you want
to play.
When searching using an acronym, click "v" and select
from the displayed characters.
NOTE
• To perform web control, you must connect a web control device
such as a PC to the same network as the AVP-A1HDCI.
• With web control, some network settings, etc., cannot be set.
• When updating firmware, settings made by the web controller may
be reset.
SOURCE SELECT
Surround mode
[ AMP]
INPUT MODE
SOURCE
SELECT
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
INPUT MODE
Other Operations and
Functions

Other Operations

Playing Super Audio CD

1
Assign "DENON LINK" with the "Digital" setting or
assign "HDMI" with the "HDMI" setting (vpage
48).
2
Either turn
SELECT]
to select the input source assigned in step 1.
The " " or "
3
Select "AUTO" for the
Surround mode
4
Select the surround mode (vpage 50 ~ 52).
We recommend playing in the DIRECT mode.
5
Start playing the Super Audio CD.
The " " indicator lights on the display.
For operating instructions, refer to the respective equipment's
operating instructions.
• When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are first converted
into PCM format, then into analog signals.
• "DSD DIRECT" is shown on the display when playing DSD 2-channel
signals in the DIRECT mode. "DSD MULTI DIRECT" is shown on
the display when playing DSD multi--channel signals in the DIRECT
mode.
• The DSD signal may not be output depending on the equipment
that is connected.For further details, refer to the user manual for the
equipment being used.
<SOURCE SELECT> [SOURCE
or press
" indicator lights on the display.
INPUT MODE
(vpage 47).