Denon AVP-A1HD Owner's Manual page 68

<STANDARD> <HOME THX CINEMA>QUICK SELECT
<POWER>
CH SELECT
uio p
QUICK SELECT
uio p
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit

Operations
1
Connect the HDMI to the AVP-A1HD with equipment
compatible with the HDMI control function.
2
Put the power on for all the equipment connected to
the HDMI.
3
Check the settings for all the equipment connected to
the HDMI and make HDMI available to them.
b Please consult the operating instructions for the connected
equipment to check the settings.
b Operations 1 ~ 3 do not have to be repeated once started.
b Carryout Operations 2 and 3 should any of the equipment be
plugged out.
4
Switch the television input to the HDMI connected to
the AVP-A1HD.
5
Switch the AVP-A1HD input to the HDMI input
source and check if the picture from the player is ok.
6
Put the television power on standby and check if the
AVP-A1HD goes into standby.
CH SELECT
If the AVP-A1HD does not work please check the following.
• Is the GUI menu "Manual Setup" – "HDMI Setup" – "HDMI Control"
– "Control" (vpage 31) set to "ON"?
• Is the GUI menu "Manual Setup" – "HDMI Setup" – "HDMI Control"
– "Control Monitor" (vpage 31) set for the monitor output
connected to television?
• Is the GUI menu "Manual Setup" – "HDMI Setup" – "HDMI Control"
– "Power Off Control" (vpage 31) set to "ON"?
• Is the control function used for the television HDMI properly set?
(Check the television operating instructions for details.)
• Should any of the operations below be performed, the interlocking
function may be reset, in which case, repeat Operation's 2 and 3.
GUI menu "Source Select" – (input source) – "Assign" – "HDMI"
•
(vpage 43) setting has changed
There is a change to the connection between the equipment and
•
the HDMI, or an increase in equipment.
Change of HDMI monitor output in AVP-A1HD setup.
•