Stereo Playback; Direct Playback; Playback In The Pure Direct Mode; Parameter - Denon AVP-A1HD Owner's Manual

DSP SIMULATION
• Press the button on the main unit or
on the main remote control unit to switch the surround mode. The
mode switches each time the button is pressed.
• Depending on the program source being played, it may not be
possible to achieve a satisfactory surround effect. In this case, try
other modes to achieve a sound field suited to your tastes.

Stereo Playback

[Selectable items]
STEREO
:
This is the mode for playing in stereo. The tone can be adjusted.
Sound is output from the front left and right speakers and subwoofer.
DIRECT/STEREO
When the main unit's button or the main remote
D/ST
control unit's button is pressed, DIRECT mode can be switched
to STEREO mode.

Direct Playback

[Selectable items]
DIRECT
:
In this mode the signals bypass the tone control circuitry for high
quality sound.
The display when the DIRECT mode is selected depends on the input
signal.
For multi-channel sources, the display depends on the surround back
output's play mode.
Input signal
Analog signal /
PCM (2ch) /
Dolby Digital source / DIRECT
DTS source /
Other 2-channel digital signals
DSD (2ch) DSD DIRECT ( z )
MULTI CH DIRECT
M DIRECT + PLgx CINEMA
PCM (multi ch)
M DIRECT + PLgx MUSIC
M DIRECT 7 .1
DSD (multi ch) DSD MULTI DIRECT ( z )
z: When DSD signals are converted to PCM signals as set by the
audio parameters and speaker settings, "DIRECT" or "MULTI CH
DIRECT" is displayed.

SIMU
button For details, see page 85.

Playback in the PURE DIRECT Mode

This is the mode that recreates the original sound most faithfully,
providing extremely high quality sound.
PURE DIRECT
Press the
PURE
button on the main remote control unit.
• To cancel, press the
PURE
button on the main remote control unit.
• When in the PURE DIRECT mode, the GUI screen is not displayed
and the display on the main unit is turned off.
• If the HDMI input connector is selected, video outputs are output in
the PURE DIRECT mode.
• The channel level and surround parameters in the PURE DIRECT
mode are the same as in the DIRECT mode.
Display
button on the main unit or the
PURE DIRECT
button on the main unit or the

Parameter

Parameters can be called out directly by pressing the
the main remote control unit.

Audio

Adjust various audio parameters.
F Menu tree F
Parameter
Audio
a Surround Parameters
s Tone
d Room EQ
f Dynamic EQ
g RESTORER
h Night Mode
j Audio Delay
a Surround Parameters
Adjust surround sound parameters.
The adjustable parameters differ for the different surround modes
(vpage 82, 83).
Mode
Select the mode according to the playback source.
n In the PLgx or PLg mode
Cinema Music
[Selectable items]
n In the DTS NEO:6 mode
Cinema Music
[Selectable items]
The "Music" mode is also effective for movie sources including a lot
of stereo music.
PARA
button on
Game Pro Logic