Table of Contents
Advertisement
3.2 Rack Mounting
To install the Switch in a 19-inch standard rack, follow the instructions described
below.
Step 1: Place your POE Ethernet Switch on a hard flat surface, with the front
panel positioned towards your front side.
Step 2: Attach a rack-mount bracket to each side of the Switch with supplied
screws attached to the package. Figure 3-2 shows how to attach brackets
to one side of the Switch.
You must use the screws supplied with the mounting brackets.
Damage caused to the parts by using incorrect screws would invali-
date the warranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the opposite side.
Step 5: After the brackets are attached to the Switch, use suitable screws to
securely attach the brackets to the rack, as shown in Figure 3-3.
Step 6: Proceeds with the steps 4 and steps 5 of session 3.1 Desktop Installation
to connect the network cabling and supply power to your Switch.
Figure 3-2: Attaching the Brackets to the Switch.
Figure 3-3: Mounting the Switch in a Rack
13
Advertisement
Table of Contents
